• Matek items
  • Quadcopter Parts
    • Battery Charger
    • Brushless Motor&ESC
    • Flight Control
    • LED Board
    • Quadcopter Frame
    • Quadcopter PDB
    • Quadcopter Propellers
  • Quadcopter Plugs
  • Remote control
  • FPV Parts
    • Antenna
    • Camera
    • GPS
    • Monitor
    • Transmitter
  • FPV Quadcopter
    • RTF Quadcoprer
    • ARF Quadcopter
    • kIF Quadcopter
  • RC Tools
  • Others Quadcopter Parts
  • Other Toys & Games
< >

LHI 1 to 6 1S Lipo Battery Parallel Charger Board XT60 Input with Dual BEC for Eachine E010 RC Drone Quad Helicopter Lipo Battery


In stock
  • XT60 2S-6S LiPo or DC 12V/3A adapter for field charging and home charging. Turns itself off when supply battery reaches safe low-voltage, LED lights indicate when each battery is done charging
  • Charge 1S LiPo batteries (4.2V) or HV Lipo batteries (4.35V) at the same board by a selectable switch
  • 200/600mA selectable current per charge port, charge up to 6 pcs batteries with Picoblade 1.25 or JST PH2.0 power plug at once
  • Perfect for Blade Inductrix and Tiny Whoop battery charging, also come with JST and Micro Losi adapter cables
  • Original factory production, quality guarantee and nice price, replace if you find it any defect, will always help solve the problems in any time.
  • Description
  • Description:
    1S LiPo LiHV Charger Board with JST and Micro Losi Cable
    This charger makes field charging your model plane, drone, or quadcopter veryconvinient! Just take any 3s or 4s lipo with an XT60 connector and plug it into this charger and charge dozens of 1s packs. You could also use a walladapter as supply power so you can continuously charge at home. Once suppliedwith a 3s or 4s battery, just plug your 1s batteries into the charger port tostart charging. When you connect a discharged 1s battery to the charger thecorresponding ports LED light will turn solid until the battery is fullycharged. Once charged, the LED will turn flashing and you can remove your 1sbattery and fly!

    Digital Display:
    INP/xxV: Input voltage
    CH1.....CH6/xxV: Inserted battery voltage
    USB/xxV: USB output voltage

    Weight: 50g
    Input port: Two methods, DC 12V/3A Adapter, XT60 LiPo Battery or Adapter
    Output port: USB 5V/2.4A
    Charge port output: Selectable 200mA and 600mA, Max charge power: 2.5W
    4.20V cell charging cutoff for Lipo battery (+- 0.5% margin of error)
    4.35V cell charging cutoff for HV Lipo battery (+- 0.5% margin of error)
    Optional AC Wall Adapter with XT60 Plug
    LED Indicators:
    Green Flashing slowly: 4.20V selected
    Green Flashing rapidly: 4.35V selected
    Green Solid: Battery Charging
    Green turn Flashing from Solid: Full Charged

    Package Contents:
    1 * 1S LiPo LiHV Charger Board
    3 * JST-PH 2.0 Male to JST Female Cable
    3 * JST-PH 2.0 Male to Micro Losi Female Cable